Nuvotem Talema Power Inductors and Chokes

Nuvotem Talema, Crolly, Letterkenny, Co. Donegal, Ireland.
Tel:++353 74 9548666, Fax ++353 74 9548139, Email info@nuvotem.com or use our Contact Form

You Are Here : Home-> Products -> Power Inductors & Chokes

Power Inductors & Chokes

Click Here for Telecom & Network Magnetics

Nuvotem Talema provide a number of ranges of Power Inductors & Chokes
Surface Mount and Through Hole

	DP Series	Low Cost Power Inductors for EMI filtering and energy storage with operating frequencies to 200kHz. 0.5 to 15 Amps, 6.8 to 4700 microHenries
	DJ & DJA Series	High Capacity Linear Storage Chokes for use in SMPS where low losses are essential at high frequencies (to 500kHz). The DJA Series utilises Fe-based amorphous alloy cores providing high flux density and low core loss. 1.5 to 29 Amps, 500 to 5000 microJoules
	SA Series	High Efficiency, High Stability Storage Chokes featuring Fe-based amorphous alloy cores which allow high flux density and low cores loss. Highly stable inductance over a wide DC bias current range and high Q with operating frequencies to 500kHz. 0.63 to 20 Amps, 10 to 8200 microHenries Click Here for a combined SA & SD Series datasheet
	SC Series	Low Profile power inductors, SMD & Through-hole. High energy storage with minimum saturation. High stability from no-load to full load. Pick & place compatible. Designed as 1:1 Coupled Inductor (Series or paralle) or as 1:1 isolation Transformer.
	SD Series	High Efficiency Storage Chokes designed with MPP cores provide excellent efficiency and field modulation when used as loading coils for energy storage. Standard range from 0.63 to 8.0 Amps, 47 to 6000 microHenries. Click Here for a combined SA & SD Series datasheet
	LC Series	Miniature Surface Mount Toroidal inductors for applications requiring energy storage for maintenance of highly stable inductance when a rapid chnage of load current occurs. 0.15 to 3.0 Amps, 2.2 to 880 microHenries.
	LCP Series	Miniature Surface Mount High Current Toroidal inductors designed for use in applications where energy storage is required. Excellent for filtering high frequency signals while supporting a substantial DC current as well as for AC ripple, SMPS and for use with DC-DC converters. 0.15 to 7.4 Amps, 2.2 to 8800 microHenries.
	SH50 Series	Toroidal Inductors compatible with National Semiconductor's 50KHz Simple Switcher Surface Mount or Through Hole. >
	SH150 Series	Toroidal Inductors compatible with National Semiconductor's 150KHz Simple Switcher Surface Mount or Through Hole. Click Here for a datasheet with PULSE Cross-Reference List
	SH260 Series	Toroidal Inductors compatible with National Semiconductor's 260KHz Simple Switcher Surface Mount or Through Hole. Click Here for a datasheet with PULSE Cross-Reference List
	SL Series	Toroidal inductors designed for high energy storage with minimum saturation and high stability from no load to full load at operating frequencies to 100MHz. Available in both SMD and TH versions. 0.71 to 23.8 Amps, 0.6 to 1295 microHenries. Click here for datasheet with Cross-Reference